4.4.8 Set Backlight
In the "System Setting" menu, scroll to the "Set Backlight" menu item and press "#" to
enter the "Set Backlight" interface.
Press "#" to toggle between the "Normal Open" state and the "Automatic Control" state of
the backlight. Automatic control refers to the backlight that will be on for every keystroke
operation or card swiping. If there is no subsequent operation, the backlight will turn off
after 1 min. Press "*" to exit. The setting will be finalized on exit.
4.4.9 Restore Expired Event
This function is designed for restoring all the expired events to the system. In the "System
Setting" menu, scroll to the "Restore Expired Event" menu item and press "#" to enter the
interface.
Press "#" to restore the events.
4.4.10 Erase All Events
The controller can record all events occurring after being powered. When the event records
are full (the maximum number of event records is 1,000,000 events), the new event records
will overwrite the earliest event records.
Set ARM Password
Erase All Events
Timeout Time
Set Backlight
System Backlight
Self-motion
[#]to toggle
Set SYS Password
Set ARM Password
Set Backlight
Restore Expired Event
Restorable event
09025
TCP/IP Network Access Controller
System Backlight
normal open
[#]to toggle
Restored events
09025
25