Table of Contents
Advertisement
After inputting a new system administration password, press "#" to confirm. The system will
display whether the new password takes effect. If the two passwords entered are different,
the system will prompt to reset.
Pressing "*" before pressing "#" for confirmation, the new password will not take effect and
the system will return to the previous menu.
3.5.7 Set ARM Password
Before protection setup and withdrawal of the controller, the alarm administration
password must be input through the keyboard. The default alarm administration password
is 00000000.
In the "System Setting" menu, scroll to "Set ARM Password" menu item and press "#" to
enter the "Set ARM Password" interface.
After inputting a new system administration password twice, press "#" to confirm and the
system will display whether the new password takes effect. If the passwords entered are
different, the system will prompt to reset.
SYS Password
_ _ _ _ _ _
Setting updated
successfully
Set Time
Auto Daylight Saving
Set SYS Password
Set ARM Password
Repeat:
_ _ _ _ _ _
Passwords mismatch
Please retry
22
Advertisement
Table of Contents
