Table of Contents
Advertisement
TCP/IP Network Access Controller
10.1.2 Automatic Backup
Data backup can be carried out by manual backup or automatic backup. The automatic
backup page is shown in the figure below.
Figure 10-3 Automatic backup
Operation Procedures:
1) Check to enable automatic backup.
2) Select the date and start time of automatic backup.
3) Set the username, password, URL, port and file save path of the backup file in the FTP
server. (FTP server refers to remote server)
4) Select whether the expired backup file is cleared during automatic backup.
5) Click the "Save" button to finish operation.
10.2 Restore
Click the "System" "Maintenance" "Restore" to enter the data restoration page. The
system provides two data restoration manners: Database restoration from FTP and
database restoration from local.
10.2.1 Restore from FTP
Figure 10-4 Restore from FTP
78
Advertisement
Table of Contents
