Connection; Connecting To The Computer Through The Tcp/Ip; Connecting To Power - EverFocus EFC301FR User Manual

3

Connection

3.1 Connecting to the Computer through the TCP/IP

User can carry out basic setting through the keypad on the EFC301F reader or connection
with the computer via TCP/IP. User can carry complicated system administration by
accessing the embedded system in the controller through various browsers.

3.2 Connecting to Power

You can power the controller through a specific PoE network switch by connecting a
network cable to the LAN port on the controller, or by connecting a 12 VDC power source to
the power port on the controller.
Note:
1. The voltage range of power source for EFC301F controller is 12 VDC±15%. The
maximum current of the controller is 600mA.
2. The distance from the power supply to the controller should be within 2 meters. In
addition, the electromagnetic lock and alarm equipment must be powered separately
from the controller. The controller can only supply power for controller and readers.
TCP/IP
DC IN RESET LAN
Figure 3-1 Connecting to power
15
TCP/IP Network Access Controller
Controller Controller
EverFocus
EverFocus
NAV Access Controller NAV Access Controller
Control Unit Control Unit
READER NET DOOR READER NET DOOR
POWER MAIN AUX LNK ACT SENSOR LOCK POWER MAIN AUX LNK ACT SENSOR
FIRE 1 2 3 4 1 2 FIRE 1 2 3 4 1
ALARM IN ALARM OUT ALARM IN ALARM OUT
MAIN READER AUX READER
Chapter
3
LOCK
2