Table of Contents
Advertisement
The magnetic lock, panalarm and the finger vein controller should be
！Important
powered respectively.
2.5.2 Connection with the Output of the Alarm
a. Connection with normally closed circuit alarm.
AlarmOut
Figure 2.5 Connection with Normally Closed Circuit Alarm
b. Connection with normally open circuit alarm.
AlarmOut
Figure 2.6 Connection with Normally Open Circuit Alarm
2.5.3 Connection with Alarm Detector Input
The connection with alarm detector input
3
AlarmIN
4
Figure 2.7 Connection with Alarm Dectector Input
2.5.4 Connection with Door Lock
The electric lock should be power supplied independently and the power source of the
lock should be decided according to the demand of the electric lock. Select the cable
for the lock prudently so that it can fit the needs of the electric current. There are two
kinds of regularly used electric controlled lock: power-on door-open and power-off
door-open, the methods of connecting differs, just as illustrated in figures below.
11
COM
12
NC
13
NO
11
COM
12
13
AlarmIn
GND
Alarm
Detector
11
Alarm
Alarm
Advertisement
Table of Contents
