Change Of Displayed Data; Common Contents In Data Change - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
3.2

Change of displayed data

Among the data displayed on the user screen, numeric data indicating set values and current
values of word devices in the PLC can be changed by key operation.
In the screen creation software FX-PCS-DU/WIN-E, "Number" and "Ascii" can be changed. In
the screen creation software SWoD5C-GOTRE-PACK, "Numerical Input" and "Ascii input" can
be changed.
3.2.1

Common contents in data change

This paragraph describes the common contents in change of numeric data and ASCII code
data.
• By touching a numeric or an ASCII code on the display screen, it can be changed.
*1 In the FX-PCS-DU/WIN-E, "Number" and "Ascii" should have been set to "PERMIT".
In the SWoD5C-GOTRE-PACK, "Numerical input" and "Ascii Input" can be changed.
• A numeral can be entered using two methods. In the first method, the keyboard for numeric
input is always displayed. In the second method, the keyboard can be called when an input
is required.
[ When the keyboard is always displayed ]
OPERATION STATE MONITOR
CURRENT VALUE
5 6 7
0 1 2
[ When the keyboard is called ]
OPERATION STATE MONITOR
CURRENT VALUE
• When Katakana characters and standard text are to be entered using ASCII codes,
make sure that the keyboard to input Katakana characters and text is always dis-
played on the screen. When the keyboard is used in the SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK, the
keyboard should be created using key codes for touch switches.
When the keyboard is called, only 0 to 9 can be entered.
1 2 3 4
Cursor
display
5 6 7 8
8 9 - CLR
3 4 ENT
1 2 3 4
Cursor
display
7 8 9 CLR
4 5 6
1 2 3
0 - ENT
• When a numeric or an ASCII code displayed on the
screen is touched, the cursor is displayed and the
numeric or the ASCII code can be changed using
the on screen keyboard.
When the SW ¨5DC-GOTRE-PACK is used,
"Project Unit" in "Auxiliary Setting" in "Common
Setting" should have been set so that the key win-
dow is open.
• Press the CLR key to cancel the input.
Press the ENT key to execute the input.
• When selecting another numeric or ASCII code,
touch it on the screen or select it using the
keys.
• If the keyboard is not displayed on the screen,
when a numeric or an ASCII code displayed on the
screen is touched, the ten-key pad is displayed as
shown on the left so that numerics can be entered.
• To enter a numeric in hexadecimal or change the
keyboard design, select an appropriate keyboard
using the "Keyboard" object.
Screen Mode 3
and
3-3