Alarm History Display Function - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
12.3.5

Alarm history display function

When an alarm device set in the screen creation software becomes ON, a message corre-
sponding to the alarm device as well as the date and time at which the alarm device became
ON are displayed on a user screen. The date and time at which the alarm device became OFF
can be also displayed.
u u u u Contents of setting
Common setting:Equivalent to the setting displayed in the alarm mode described in Section 6
Display setting : Number of display lines (of alarm history), sort (from the oldest one/from the
u u u u Display example
Number of
display lines: 3
Date when the alarm
device became ON
Time when the alarm
device became ON
Basic setting: Figure (with a frame), frame color, color inside frame and title
color
latest one), character size and recovery column (whether or not the recovery
column is to be displayed)_Display format: Title (which may be changed)
Width (display size in the horizontal direction: full-width x width)
Color (The display color and the title color are set in the basic setting.)
Contents (Date, time and characters can be specified.)
Characters (to be displayed when characters are selected as contents)
OCCURRED
Title
98/12/25 15:00:00
98/12/26 14:30:00
98/12/26 16:40:00
Creation of Display Screen (SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK) 12
MESSAGE REST
MOTOR 1 STOP 16:00
MOTOR 1 STOP 15:00
MOTOR 1 STOP 17:00
Display frame
Time when the alarm device
became OFF
Comment created in "Create
Comment" in the screen
creation software
12-11