Set Time Switch - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
8.2

SET TIME SWITCH

Set the time switch using the clock function built in the GOT.
This function turns on up to 8 consecutive bit devices during the set time when the specified
day of the week and the time have come.
Target bit devices can be specified using the screen creation software FX-PCS-DU/WIN-E.
u u u u Basic operation
The OTHER MODE
screen is displayed.
Paragraph 8.1
Day of the week : Select desired days of the week by pressing them."l" is added to selected
START TIME
END TIME
< Example >
[ OTHER MODE MENU ]
[ SET TIME SWITCH ]
CH1
CH2
CH3
CH4
a) Target bit devices
Specify up to 8 consecutive devices.
• In the setting on the screen 2, (CH1) M100 will remain ON from 10h 11m 12s to 10h 12m
12s on Monday to Friday.
SET TIME SWITCH
Select "SET TIME
SWITCH" on the
screen.
days of the week.
When a day of the week marked with "l" is pressed again, selection is can-
celed.
: Set the time at which the specified bit devices become ON. The devices will
remain ON from the start time to the end time on the selected days of the
week.
: If the end time is earlier than the start time, the specified bit devices remain
ON until the following day (even if the following day is not selected).
Screen1
END
CH5 a)
CH6
CH7
CH8
The channel setting
CH1 to CH8
screen is displayed.
Select channels
(= bit devices)
1 to 8 to be set.
Screen 1
[ CHANNEL ]
[ SET TIME SWITCH ]
CH1:
SUN MON TUE WED THU FRI SAT
START TIME
END TIME
5 6 7 8
0 1 2 3
Other Mode 8
Screen 2
Screen2
END
10h 11m 12s
10h 12m 12s
9 - CLR
4 ENT
8-2