10.4.16 Ascii - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT

10.4.16 Ascii

The "Ascii" object displays characters corresponding to specified word devices (T, C, D, V or
Z). Arbitrary characters can be displayed on one base screen.
u u u u Contents of setting
Attribute
Position
Bg and Text
Character Size
Word Device
Data Length
Data Changeable Set whether or not the data can be changed using keys.
User ID
Destination ID
Frame
Frame Color
Alphabets, numerics, etc. which can be specified using shift JIS codes (for Japanese) or ASCII
codes (for half-width characters) (For character codes, refer to the appendix.)
u u u u How to specify character codes
• Refer to the Appendices for further details about ASCII.
• Reading the ASCII table
This section describes how to read ASCII using the Appendix as an example.
One ASCII character is displayed by combining both the vertical and horizontal axes.
Example Select "A" Horizontal axis H40 Vertical axis 1 à ASCII H41 (hexadecimal expression)
Heigher
Lower
Bit
0
1
2
3
Enter the X and Y coordinates in the unit of dot.
Enter the background color and the display color. (Initial values: White
and black)
Enter the width (W) and the height (H) of characters. The available
sizes are x0.5, x1, x2, x3 and x4.
Enter the head of word devices storing character codes to be dis-
played.
1 word (16 bits) corresponds to one full-width character or two half-
width characters.
Up to 12 words (= 12 full-width characters or 24 half-width characters)
can be displayed.
*1 Consecutive devices only can be specified.
*2 Each of high-speed counters C200 to C255 occupies 32 bits, and
is regarded as 2 words.
The text length shall be up to 20 words.
These IDs are effective when "Data Changeable" is made effective.
An object to be displayed next when a cursor control key is pressed.
Select the frame displayed around the characters. (Initial setting: No
frame)
Enter the frame color. The area inside the frame is filled with the
background color.
Select "b" Horizontal axis H50 Vertical axis 1 à ASCII H62 (hexadecimal expression)
Bit 1 2
(SP)
!
"
#
Creation of Display Screens (FX-PCS-DU/WIN-E) 10
Contents of setting
.....The vertical axis shows the last digit of the code.
3 4 5
0 @ P
1 A Q
2 B R
3 C S
Refer to
Paragraph
3.3.
6 7
@ p
a q
b r
c s
10-37