Application Example 2 - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
13.6.2

Application example 2

In the example below, changeover of the base screen and screen changeover using touch
keys is combined.
Changeover of the base screen
Word device specifying the changeover destination: D0 (initial value)
ST. 1
ST. 2
ST. 1 key
STATION 1 MONITOR
PROCESSING
When a sequence program is executed,
screen No. 10 or 20 is displayed.
• Program example for application example 2
Initialization pulse
FX Series: M8002
A Series : M9038
Interlock is required so that the screen is not
changed over to screen No. 10 or 20 while
screen No. 1 is displayed.
Screen No. 1
* MENU *
MONITOR
MONITOR
ST. 2 key
To screen
No. 3
Screen No. 2
Creation of Display Screens (SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK) 13
It is registered as the common setting for all screens.
• When the ST. 1 key is pressed, screen No. 2 is dis-
played. When the ST. 2 key is pressed, the screen No.
3 is displayed.
Setting of screen No. 1
ST. 1 key : Fixed value = 2
ST. 2 key : Fixed value = 3
• When the sequence program shown below is executed
while screen No. 2 is displayed, the screen No. 10 or
20 is displayed by the base screen changeover func-
tion.
MOV K1 D0
MOV K10 D0
MOV K20 D0
No. 1
Screen No. 10 is displayed
Screen No. 20 is displayed
13-10