Bit Function - Mitsubishi F940GOT-SWD-E Operation Manual

Graphic Operation Terminal F940GOT
12.5.2

Bit function

The bit function allows a touch key in the GOT to control the ON/OFF status of a bit device in
the PLC.
The bit function allows a touch key to act as a switch such as a pushbutton switch.
u u u u Contents of setting
1) Operation mode
• Select one among the following output operation modes.
Bit momentary: Turns on/off the controlled bit device in accordance with the ON/OFF sta-
Bit ALT
Bit SET
Bit RESET
Operation examples of "Momentary" and "Bit ALT"
When a touch key is pressed, Y0 in the PLC is output.
-Switch
When "Operation" is set to "Momentary"
Touch key
Y0
tus of the control input key.
: Turns on/off the controlled bit device every time the control input key
becomes ON from OFF (alternate type switch).
: Forces ON the controlled bit device when the control input key becomes
ON. The controlled bit device remains ON until a reset input is given.
: Forces ON the controlled bit device when the control input key becomes
ON.
Control input: Touch key
Controlled bit device: Y0
ON
OFF
ON
OFF
Creation of Display Screen (SW¨ ¨ ¨ ¨ D5C-GOTRE-PACK) 12
When "Operation" is set to "Alternate"
ON
OFF
ON
OFF
12-27