Mitsubishi F940GOT-SWD-E Operation Manual page 47

Graphic Operation Terminal F940GOT
Each setting screen is displayed as shown below. On each screen, when the END key at the
upper right corner is pressed after setting is completed, the SET-UP MODE screen is dis-
played.
[ LANGUAGE ]
[ LANGUAGE ]
SYSTEM LANGUAGE:
ENGLISH
CHARACTER SET:
JAPANESE
[ PLC TYPE ]
[ PLC TYPE ]
PLC TYPE:
CONNECTION:
STATION #:
• Select the connected PLC type.
• The areas on the screen enclosed with
solid lines function as touch keys. Every
time a touch key is pressed, the dis-
played contents are changed over.
END
a)
b)
END
FX SERIES a)
CPU PORT b)
c)
* *
• Set the language used on the system screens and the
user screens.
a) SYSTEM LANGUAGE
Allows to set the language displayed on the system
screens and in error messages.
b) CHARACTER SET
Allows to set the language displayed on the user
screens. JAPANESE, CHINESE and KOREAN are
available. Only one language can be selected at a
time.
a) PLC TYPE
Allows to select any one among FX SERIES, A
SERIES, C SERIES (manufactured by OMRON), N
SERIES (manufactured by FUJI ELECTRIC) and
UNIVERSAL (general-purpose communication).
b) CONNECTION
Allows to set the connection method of the PLC
selected in 1) above.
- CPU PORT: The GOT is connected directly to the
program connector in the PLC (RS-422 or RS-
232C).
The FX Series, the A Series, a motion controller
and the N Series are available.
- LINK PORT (RS422): The GOT performs communi-
cation in accordance with the RS-422 via a link unit.
The A Series, the C Series and the N Series are
available.
- LINK PORT (RS232C): The GOT performs commu-
nication in accordance with the RS-232C via a link
unit.
The A Series, the C Series and the N Series are
available.
c) STATION #
Allows to set the station No. of the link unit connected
to the GOT when "LINK PORT" is selected in 2)
above.
Start up 2
2-5