Error Codes And Error Messages 9 - 1 To; Definition Of The Error Codes And Messages Displayed - Mitsubishi 900 Series User Manual

9 ERROR CODES AND ERROR
MESSAGES
This chapter explains the error codes and error messages displayed by the alarm list (system alarm) display
function of the monitoring functions.
The error codes may also be confirmed in the error code storage area of the system information function.
Refer to the following manual for details of the alarm list (system alarm) function and system information
function.
• When GT Designer is used
• When GT Designer2 is used : GT Designer2 Version
9.1 Definition of the Error Codes and Messages
Displayed
This section describes the definition of the error codes and error messages displayed on the monitor screen
by the alarm list (system alarm) display function and the manuals to refer to.
(1) Display format on the monitor screen ----- Displayed in the user-set position
Alarm No.
Error code
(2) Error codes and manuals to refer to
Source of Error Occurrence
ACPU
MNET/B, MNET(II)
GOT
MNET/10
CC-Link
QnACPU
*1 Take action with reference to the section explaining the link special relay of the (error code) + 9000.
For example, when the error of error code (210) has occurred, 210 + 9000 = 9210 and refer to the explanation of
M9210 and take the corrective action.
*2 Take action with reference to the section explaining the link special relay of the (error code) – 500.
For example, when the error of error code (510) has occurred, 510 - 500 = 10 and refer to the explanation of
SB000A and take the corrective action.
(Since the link special relay is in hexadecimal, replace a decimal by a hexadecimal.)
*3 Take action with reference to the section explaining the link special relay of the (error code) - 800.
For example, when the error of error code (910) has occurred, 910 – 800 = 110 and refer to the explanation of
SB006E and take the corrective action.
(Since the link special relay is in hexadecimal, replace a decimal by a hexadecimal.)
*4 The FXCPU has error codes 100 to 109 and displays the states of M8060 to M8069 with the error codes.
For example, when the error of error code (100) has occurred, refer to the explanation of M8060 and take the cor-
rective action.
: Help function of GT Designer
Alarm message
Error message
Error Code
0 to 199
[User's Manual of ACPU where GOT is connected]
(Value of D9008)
200 to 299 [Data Link System Reference Manual of MNET(II), MNET/B] *1
300 to 499 [Section 9.2]
500 to 799 [Network System Reference Manual of MNET/10] *2
800 to 999
[CC-Link System Master Local Module User's Manual] *3
1000 to 9999
[User's Manual of QnACPU where GOT is connected]
(Value of SD0)

9.1 Definition of the Error Codes and Messages Displayed

Reference Manual
Time of occurrence
Time when error occurred
(most recent)
Where to Refer To
9
9 - 1