7.0 Fitting the Outercase
7.1
Fitting the Outercase
1. The warning label may be removed unless the boiler
is to be fitted within a cupboard.
2. Taking the ready assembled outercase, the front
door of which has already been removed, proceed as
Infill Panel
Fig. 91
follows:
3. If the appliance is flued to the left or to the right,
remove the relevant infill panel by removing the
retaining clips and fixing screws (Fig. 91).
4. Offer the outer case up to the hooks on the top of
the back plate (Fig. 93).
5. Ensure that the outer case is located over the lower
tabs on the back plate on both sides (Fig. 94).
6. Using the two screws previously removed, secure
the outer case to the combustion box (Fig. 92).
7. Replace the lower front door panel.
Fig. 92
8. Instruct the user in the operation of the boiler
controls. Hand over the Users Operating, Installation
and Servicing Instructions, giving advice on the
necessity of regular servicing.
Fig. 93
Fig. 94
34
© Baxi Heating UK Ltd 2009