Fitting The Outercase - Baxi Solo 3 30 PF System Installation And Servicing Instructions

8.0 Fitting the Outercase - Page 34

8.1 Fitting the Outercase

1. The warning label may be removed unless the boiler is to
be fitted within a cupboard or compartment.
2. If the appliance is flued to the left or to the right, remove
the relevant infill panel from the case by removing the
retaining clips and fixing screws (Fig. 87).
3. Offer the outer case up to the wall plate. Engage the slots
in the case over the hooks on the back plate. Ensure that the
case is positively located (Fig. 86).
4. Using the two screws previously removed, secure the
outer case to the combustion box (Fig. 85).
5. Replace the lower front door panel and hinge upwards,
ensuring it is secured by the two magnets (Fig. 87 & 88).
6. Instruct the user in the operation of the boiler controls.
Hand over both the Users Operating and Installation
Instructions giving advice on the necessity of regular
servicing.