Manufacturer Mode Select; Sas Enable (X10Drh-Cln4 Only) - Supermicro X10DRH-CLN4 User Manual

X10DRH-CLN4/iLN4 Motherboard User's Manual

Manufacturer Mode Select

Close pin 2 and pin 3 of Jumper JPME2
to bypass SPI flash security and force the
system to operate in the manufacturer
mode, which will allow the user to flash
the system firmware from a host server
for system setting modifications. See the
table on the right for jumper settings.

SAS Enable (X10DRH-CLN4 only)

Jumper JPS1 allows the user to enable
the onboard SAS connections. The
default setting is 1-2 (enabled). See the
table on the right for jumper settings.
BMC
LAN CTRL
IPMI CODE
A
SAS CODE
MAC CODE
BAR CODE
BIOS
LICENSE
q
BIOS
PCH
B
JPS1
JBT1
LSI 3008
SAS CTRL
BT1
SAS4-7
SAS0-3
S-SATA(0-3)
Battery
SP1
LAN2/4 LAN1/3
UID
VGA
FAN6
USB4/5
(3.0)
FAN5
CPU2
Close First
Open First
X10DRH-CLN4/iLN4
Rev. 1.01
CPU1
Close First
Open First
2-36
ME Mode Select
Jumper Settings
Jumper Setting Definition
1-2 Normal (Default)
2-3 Manufacture Mode
SAS Enable
Jumper Settings
Jumper Setting Definition
1-2 Enabled (Default)
2-3 Disabled
USB0/1
A.
COM1
lect
B.
JF1
JF2
ME Mode Se-
SAS Enable