Supermicro X10DRH-CLN4 User Manual page 106

X10DRH-CLN4/iLN4 Motherboard User's Manual
the receiving buffer is full. Send a "Start" signal to start data-sending when
the receiving buffer is empty. The options are None, Hardware RTS/CTS, and
Software Xon/Xoff.
The following settings will be displayed:
Data Bits, Parity, Stop Bits
Trusting Computing

If a TPM (Trusted Platform Module) device is detected by the BIOS, the following
screen will display:
Security Device Support
If this feature and the TPM jumper on the motherboard are both set to Enabled,
onboard security devices will be enabled for TPM (Trusted Platform Module) support
which will enhance data integrity and network security. Please reboot the system
for the change of the setting to take effect. The options are Enabled and Disabled.
TPM State
Select Enabled to use TPM (Trusted Platform Module) settings to enhance system
data security. Please reboot your system for any change on the TPM state to take
effect. The options are Disabled and Enabled.
Pending Operation
Use this item to schedule a TPM-related operation to be performed by a security
device for system. Please reboot your system for the BIOS to carry out a pending
TPM operation. The options are 0, Enable Take Ownership, Disable Take Owner-
ship, and TPM Clear.
(Available when a TPM device is installed)
4-36