System
Health
Monitoring
System
Management
Dimensions
Note 1: The CPU maximum thermal design power (TDP) is subject to
chassis and heatsink cooling restrictions. For proper thermal management,
please check the chassis and heatsink specifications for proper CPU TDP
sizing.
Note 2: For IPMI configuration instructions, please refer to the Embedded
IPMI Configuration User's Guide available at http://www.supermicro.com/
support/manuals/.
Note 3: It is strongly recommended that you change BMC log-in informa-
tion upon initial system power-on. The manufacture default username is
ADMIN and the password is ADMIN. For proper BMC configuration, please
refer to http://www.supermicro.com/products/info/files/IPMI/Best_Practices_
BMC_Security.pdf
System Health/CPU Monitoring
•
Onboard voltage monitoring for +3.3V, 3.3V standby,
+5V, +5V standby, +12V, CPU core, memory, chipset,
BMC, PCH, and battery voltages
•
CPU/system overheat LED and control
•
CPU Thermal Trip support
•
Status monitor for speed control
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to
145W (See Note 1 below.)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zone
•
Low-noise fan speed control
•
Pulse Width Modulation (PWM) fan control
•
PECI (Platform Environment Control Interface) 2.0
support
•
UID (Unit Identification)/Remote UID
•
System resource alert via SuperDoctor® 5
•
SuperDoctor® 5, Watch Dog, NMI
•
Chassis intrusion header and detection
•
12.00" (L) x 13.00" (W) (304.80 mm x 330.20 mm)
1-9
Chapter 1: Overview