Motherboard Features - Supermicro X10DRH-CLN4 User Manual

Motherboard Features

CPU
Memory
Chipset
Expansion
Slots
Graphics
Network
I/O Devices
•
Dual Intel® E5-2600 v3 Series processors (Socket
R3-LGA 2011); each processor supports dual full-
width Intel QuickPath Interconnect (QPI) links (of up
to 9.6 GT/s one direction per QPI)
Note: Both CPUs need to be installed for full
access to the PCI-E slots, DIMM slots, and on-
board controllers. Refer to the block diagram on
page 1-10 to determine which slots or devices
may be affected.
•
Integrated memory controller supports up to 1024 GB
of Load Reduced (LRDIMM) or 512 GB of Registered
(RDIMM) DDR4 (288-pin) ECC memory of up to 2133
MHz (in 16 slots)
Note 1: Memory speed support depends on the
processors used in the system.
Note 2: For the latest CPU/memory updates,
please refer to our website at http://www.super-
micro.com/products/motherboard.
DIMM Sizes
•
DIMM Up to 64GB at 1.2V
•
Intel® PCH C612
•
Four (4) PCI Express 3.0 x8 slots (CPU2 Slot2/Slot3/
Slot5, CPU1 Slot6)
•
One (1) Express 3.0 x4 in x8 slot (CPU1 Slot 7)
•
Two (2) PCI-Express 3.0 x16 slots (CPU1 Slot1,
CPU2 Slot4)
•
Graphics controller via ASpeed 2400 BMC
•
Intel® i350 Gigabit (10/100/1000 Mb/s) Ethernet
Controller for LAN 1/2/3/4 ports
•
ASpeed AST 2400 Baseboard Controller (BMC) sup-
ports IPMI 2.0
SATA/SAS Connections
•
SATA 3.0
•
RAID (PCH)
1-7
Chapter 1: Overview
Six (6) SATA 3.0 ports supported
by Intel PCH (I-SATA 0-5)
One (1) SATA 3.0 vertical con-
nector with 4 connections (S-
SATA 0-3)
RAID 0, 1, 5, 10