Management Engine (Me) Recovery; Manufacturer Mode Select - Supermicro X9DRW-CF31 User Manual

Management Engine (ME) Recovery

Use Jumper JPME1 to select ME Firm-
ware Recovery mode, which will limit
resource allocation for essential system
operation only in order to maintain nor-
mal power operation and management.
In the single operation mode, online
upgrade will be available via the ME
Recovery mode. See the table on the
right for jumper settings.

Manufacturer Mode Select

Close Pin 2 and Pin 3 of Jumper JPME2
to bypass SPI flash security and force
the system to operate in the Manufac-
turer mode, allowing the user to flash
the system firmware from a host server
for system setting modifications. See the
table on the right for jumper settings.
BMC
JSD1
JBT1
A
B
BIOS
Intel
PCH
LAN1 USB2/3 USB0/1
LAN2
UID
LED3
LAN
i350 (-CF31)
X540 (-CTF31)
IPMI_LAN
CLOSE 1st
CPU2
OPEN 1st
JBAT1
BAR CODE
CLOSE 1st
CPU1
OPEN 1st
2-39
ME Recovery
Jumper Settings
Jumper Setting
1-2 Normal (Default)
2-3 ME Recovery
ME Mode Select
Jumper Settings
Jumper Setting
1-2 Normal (Default)
2-3 Manufacture Mode
VGA
COM1
X9DRW-CF31
Rev. 1.01
FAN1
Chapter 2: Installation
Definition
Definition
JPME1
A.
B. JPME2