Peripheral Devices - Supermicro X10DRH-CLN4 User Manual

X10DRH-CLN4/iLN4 Motherboard User's Manual
Peripheral
Devices
BIOS
Power
Management
•
S A S 3 . 0
( X 1 0 D R H -
CLN4 only)
•
R A I D
( L S I 3 0 0 8 )
( X 1 0 D R H -
CLN4 only)
IPMI 2.0
•
IPMI 2.0 supported by ASpeed AST 2400
Serial (COM) Port
•
One (1) Fast UART 16550 port on the I/O back panel
•
One (1) serial-port header
USB Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB 0/1)
•
One (1) internal USB 2.0 header with two (2) USB
connections on the motherboard for front access
(USB 2/3)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB 4/5)
•
One (1) internal USB 3.0 header with two (2) USB
connections on the motherboard for front access
(USB 7/8)
•
One (1) type-A USB 3.0 connector for front access
(USB 6)
•
16 MB SPI AMI BIOS
•
ACPI 2.0/3.0/4.0, USB keyboard, Plug-and-Play
(PnP), SPI dual/quad speed support, Riser card
auto detection support, Dual BootBlock support, and
SMBIOS 2.7 or later
•
ACPI Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 3.0 (avail-
able when the Supermicro Power Manager [SPM] is
installed and a special power supply is used. See the
note on Page 1-14.)
•
Management Engine (ME)
1-8
Eight (8) SAS/SATA 3.0 connec-
tions (SAS 0-3, 4-7)
RAID 0, 1, 10
SM Flash UEFI BIOS
®