Overheat (Oh)/Fan Fail/Pwr Fail/Uid Led; Power Fail Led - Supermicro X10DRH-CLN4 User Manual

X10DRH-CLN4/iLN4 Motherboard User's Manual
Overheat (OH)/Fan Fail/PWR Fail/
UID LED
Connect an LED cable to pins 7 and
8 of the front control panel to use the
Overheat/Fan Fail/Power Fail and
UID LED connections. The red LED
on pin 8 provides warnings of over-
heat, fan failure, or power failure. The
blue LED on pin 7 works as the front-
panel UID LED indicator. Refer to the
table on the right for pin definitions.

Power Fail LED

The Power Fail LED connection is
located on pins 5 and 6 of JF1. Re-
fer to the table on the right for pin
definitions.
UID
FAN6
BMC
LAN CTRL
IPMI CODE
SAS CODE
MAC CODE
BAR CODE
BIOS
LICENSE
q
BIOS
PCH
Close First
JPS1
JBT1
LSI 3008
SAS CTRL
BT1
SAS4-7
SAS0-3
S-SATA(0-3)
Battery
SP1
LAN2/4 LAN1/3 USB0/1
COM1
VGA
USB4/5
(3.0)
FAN5
CPU2
Close First
Open First
X10DRH-CLN4/iLN4
Rev. 1.01
CPU1
Open First
JF1
JF2
2-24
OH/Fan Fail/ PWR Fail/Blue_UID
LED Pin Definitions (JF1)
Pin# Definition
7 Blue UID LED
8 OH/Fan Fail/Power Fail
OH/Fan Fail/PWR Fail
LED Status (Red LED)
State Definition
Off Normal
On Overheat
Flashing Fan Fail
PWR Fail LED
Pin Definitions (JF1)
Pin# Definition
5 3.3V
6 PWR Supply Fail
A. OH/Fail/PWR Fail LED
B. PWR Supply Fail
2
1
Power Button
Reset Button
3.3V
UID LED
NIC2/4 Activity LED
NIC1/3 Activity LED
UID Switch
3.3 V
X
NMI
19 20
Ground
Ground
B
Power Fail LED
OH/Fan Fail/
A
PWR Fail LED)
NIC2/4 Link LED
NIC1/3 Link LED
HDD LED
FP PWRLED
X
Ground