Manufacturer Mode Select; Sas Enable (For X10Qbl-4Ct Only) - Supermicro X10QBL-4CT User Manual

Manufacturer Mode Select

Close pin 2 and pin 3 of Jumper JPME2
to bypass SPI flash security and force the
system to operate in the Manufacturer
mode, which will allow the user to flash
the system firmware from a host server
for system setting modifications. See the
table on the right for jumper settings.

SAS Enable (for X10QBL-4CT only)

Use Jumper JPS1 to enable or disable
onboard SAS connections (L-SAS 0-3,
4-7) on the X10QBL-4CT. The default
setting is on pins 1/2 to enable SAS
support. See the table on the right for
jumper settings.
LEDBMC
BMC
BMC
LAN CTRL
JPTG1
A
JBT1
USB4/5
USB6/7
PCH
PCH
BIOS
BT2
CMOS
CLOSE 1st
CPLD
Battery
OPEN 1st
SAS CTRL
SAS CTRL
CPU1
JPWR5
JPWR4
JPS4
B
JPS1
JPWR3
USB8
SP1
JPI2C1
JPWR2 JPWR1
UID USB0/1 USB2
VGA
LED1
IPMI_LAN
LAN1/2
FAN10
MAC CODE
IPMI CODE
BAR CODE
SAS CODE
X10QBL-4(CT)
Rev. 1.01
CPU2
CLOSE 1st
OPEN 1st
CLOSE 1st
FAN7
2-35
ME Mode Select
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
SAS Enable
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
COM1
FAN9
FAN8
IB CODE
CPU4
OPEN 1st
OPEN 1st
CPU3
CLOSE 1st
LED15
JF1
LEDPWR
FAN1
Chapter 2: Installation
Definition
Normal (Default)
Manufacture Mode
Definition
Enabled (Default)
Disabled
JPME2
A.
JPS1 (X10QBL-
B
4CT only)