Advanced Power Management Configuration - Supermicro X10DRH-CLN4 User Manual

X10DRH-CLN4/iLN4 Motherboard User's Manual
X2 APIC (Advanced Programmable Interrupt Controller)
Based on Intel's Hyper-Threading architecture, each logical processor (thread) is
assigned 256 APIC IDs (APIDs) in 8-bit bandwidth. When this feature is set to En-
able, the APIC ID will expand(X2) from 8 bits to 16 bits to provide 512 APIDs to each
thread for CPU performance enhancement. The options are Disable and Enable.
AES-NI
Select Enable to use the Intel Advanced Encryption Standard (AES) New Instruc-
tions (NI) to ensure data security and integrity. The options are Enable and Disable.
Intel Virtualization Technology
Select Enable to use Intel Virtualization Technology support for Direct I/O VT-d sup-
port by reporting the I/O device assignments to the VMM (Virtual Machine Monitor)
through the DMAR ACPI tables. This feature offers fully-protected I/O resource
sharing across Intel platforms, providing greater reliability, security and availability
in networking and data-sharing. The options are Enable and Disable.
Advanced Power Management Configuration

Advanced Power Management Configuration

Power Technology
Select Energy Efficient to support power-saving mode. Select Custom to custom-
ize system power settings. Select Disabled to disable power-saving settings. The
options are Disable, Energy Efficient, and Custom.
Advanced Power Management Configuration
Advanced Power Management Configuration
Power Technology
Select Energy Efficient to support power-saving mode. Select Custom to custom-
ize system power settings. Select Disable to disable power-saving settings. The
options are Disable, Energy Efficient, and Custom.
*If the option is set to Custom or Energy Efficient, the following items will display:
Energy Performance Tuning (Available when Power Technology is set to
Custom or Energy Efficient)
Select Enable for energy-performance tuning support to enhance energy ef-
ficiency, which might compromise system performance. The options are Enable
and Disable.
4-8