Manufacturer Mode Select; Me Recovery - Supermicro X10DBT User Manual

Manufacturer Mode Select

Close pin 2 and pin 3 of Jumper JPME2
to bypass SPI flash security and force the
system to operate in the Manufacturer
mode, which will allow the user to flash
the system firmware from a host server
for system setting modifications. See the
table on the right for jumper settings.

ME Recovery

JPME1 is used for ME Firmware Re-
covery mode, which will limit system
resource for essential function use only
without putting restrictions on power
use. In the single operation mode, online
upgrade will be available via Recovery
mode. See the table on the right for pin
definitions.
VGA
SW1
UID_LED1
BMC
JC1
+12V PWR
PWR OUTPUT
A JPW1
B
JC1
CLOSE 1st
CPU1
OPEN 1st
BT2
JC1 JC1
COM1
LAN1
USB0/1 LAN2
FAN5
IPMI_LAN
LAN CTRL
JC1
JP4
JI2C2
JI2C1
X10DBT-(T)
Rev. 1.02
JC1
CLOSE 1st
BIOS
LICENSE
CPU2
MEGERAC
LICENSE
OPEN 1st
LE3
LE1
PCH
JBT1
JC1
2-27
ME Mode Select
Jumper Settings
Jumper Setting
1-2
2-3
ME Recovery
Jumper Settings
Jumper Setting
Open
Closed
SXB3
JC1
Chapter 2: Installation
Definition
Normal (Default)
Manufacture Mode
Definition
Normal (Default)
ME Recovery
JPME1
A.
JPME2
B.