2-10 Sata/Sas Connections; Sata 3.0 And S-Sata 3.0 Connections - Supermicro X10DRH-CLN4 User Manual

2-10 SATA/SAS Connections

SATA 3.0 and S-SATA 3.0 Connections

Ten SATA 3.0 connections are located on the motherboard. Six SATA 3.0 ports
(I-SATA 0-5) are supported by the Intel PCH C612. A vertical S-SATA connector,
offers four S-SATA 3.0 connections (S-SATA 0-3). I-SATA4/5, colored in yellow,
are used with Supermicro SuperDOM (Disk-on-Module) connectors with power-
pins built in. Supermicro SuperDOM connectors are backward-compatible with
regular SATA HDDs and SATA DOMs. All SATA ports provide serial-link signal
connections, which are faster than the connections of Parallel ATA. See the table
on the right for pin definitions.
Note 1
power pins built in and do not require separate external power cables.
These connectors are backward-compatible with non-Supermicro SATA-
DOMs that require an external power supply.
Note 2: For more information on the SATA HostRAID configuration, please
refer to the Intel SATA HostRAID user's guide posted on our website @
http://www.supermicro.com..
BMC
IPMI CODE
SAS CODE
MAC CODE
BAR CODE
A
B
BIOS
LICENSE
q
C
D
BIOS
E F
PCH
JPS1
JBT1
LSI 3008
SAS CTRL
SAS4-7 SAS0-3
S-SATA(0-3)
SP1
G
:
Supermicro SuperDOMs are yellow SATADOM connectors with
UID
VGA
FAN6
LAN CTRL
CPU1
Close First
BT1
Battery
LAN2/4 LAN1/3 USB0/1
COM1
USB4/5
(3.0)
FAN5
CPU2
Close First
Open First
X10DRH-CLN4/iLN4
Rev. 1.01
Open First
2-39
Chapter 2: Installation
A. I-SATA0
B. I-SATA1
C. I-SATA2
D. I-SATA3
E. I-SATA4
F. I-SATA5
G. S-SATA(0-3)
JF1
JF2