HYOSUNG Aquil GV650 Service Manual page 179

▣ REAR WHEEL SHOCK ABSORBER
Inspect the rear wheel shock absorber for wear and dam-
age.
Replace the rear wheel shock absorber if there is any-
thing unusual.
▣ REAR PULLEY
Inspect the pulley's teeth for wear. If they are worn,
replace the pulley and drive belt as a set.
◉ REASSEMBLY
Reassemble the rear wheel and r e a r brake in
the reverse order of disassembly.
Pay attention to the following points :
● Tighten the rear pulley bolts to the specified torque.
Rear pulley bolt
● With the rear wheel installed, tighten the rear axle
bolt ① to the specified torque.
Rear axle bolt : 90~140 N∙m (9.0~14.0 kg∙m)
: 20~30 N∙m (2.0~3.0 kg∙m)
CHASSIS 7-34
①