HYOSUNG Aquil GV650 Service Manual page 63

● Remove the mission oil pipe mounting bolt.
● Separate the crankcase into 2 parts, right and left,
with a special tool.
Crankcase separator : 09920-13120
CAUTION
When separating the crankcase, necessarily,
remove it after installed the special tool
(Crankcase separator) on the side of clutch.
In case separate oppositely, the gearshift cam
stopper will be damaged in the side of magneto.
NOTE
Fit the crankcase separater, so that the tool
arms parallel the side of the crankcase.
● Remove the gearshift fork shaft ① and gearshift
fork ②.
● Remove the gearshift cam ③.
● Remove the driveshaft assembly ④, countershaft
assembly ⑤.
①
④
②
③
ENGINE 3-20
⑤
②