HYOSUNG Aquil GV650 Service Manual page 31

● Recheck the drive belt slack after tightening the
rear axle bolt.
WARNING
Be careful not to touch the muffler when it is hot :
a hot muffler can burn you.
CAUTION
The drive belt for this motorcycle is made of the
special material.
The belt should be replaced with a "Poly chain
belt" for
Use of another belt may lead to premature belt
failure.
▣ CAUTION OF DRIVE BELT
When the drive belt was bent excessively, the belt inner
cord is broken.
Never bend the drive belt under the specification of
inner or back bend capacity.
BEND CAPACITY OF DRIVE BELT
least 102 mm (4.02 in)
Inner
least 204 mm (8.04 in)
Back
CAUTION
● Never bend or twist when the drive belt is kept
or installed.
● If the drive belt was installed with driver
forcedly, damage the drive belt.
. .
PERIODIC MAINTENANCE 2-16
�
※ � Back bend � Inner bend
Never clamp or bend
�