HYOSUNG Aquil GV650 Service Manual page 171

▣ FRONT FORK INNER ROD LOCK NUT
● Adjust the height � of the inner rod threads by turn-
ing the lock nut ① at 11mm(0.43 in) as shown in
illustration.
▣ FORK SPRING
● Install the fork spring as shown in the illustration.
● Install the spring retainer and the spacer.
▣ FRONT FORK CAP BOLT
● Hold the cap bolt ② and tighten the lock nut ③ to the
specified torque.
Inner rod lock nut
: 17.5~22.5 N∙ ∙ m (1.75~2.25 kg∙ ∙ m)
● Install the front fork cap bolt to the outer tube tem-
porarily.
● Set the front fork to the lower bracket temporarily,
tighten the front fork cap bolt ④ to the specified
torque.
Front fork cap bolt
: 30~40 N∙ ∙ m (3.0~4.0 kg∙ ∙ m)
● With the front fork upper face contacted with the
steering stem upper bracket, tighten the front fork
upper and lower clamp bolts to the specified torque.
Front fork upper clamp bolt
: 22~35 N∙ ∙ m (2.2~3.5 kg∙ ∙ m)
Front fork lower clamp bolt
: 22~35 N∙ ∙ m (2.2~3.5 kg∙ ∙ m)
①
↓
↑
Upper side
↓
↑
③
④
CHASSIS 7-26
�
②