HYOSUNG Aquil GV650 Service Manual page 33

▣ FRONT AND REAR BRAKE PAD
REPLACEMENT
● Remove the brake caliper.
● Remove the brake pads.
● To reassemble, reverse the above sequence.
Front brake caliper mounting bolt
: 18~28 N∙m (1.8~2.8 kg∙m)
Rear brake caliper mounting bolt
: 18~28 N∙m (1.8~2.8 kg∙m)
▣ FRONT AND REAR BRAKE FLUID
REPLACEMENT
● Place the motorcycle on a level surface and keep the
handlebars straight.
● Remove the master cylinder reservoir cap and diaphragm.
● Suck up the old brake fluid as much as possible.
● Fill the reservoir with new brake fluid.
Specification and Classification
(Front brake) : DOT 3 or DOT 4
(Rear brake) : DOT 4
● Connect a transparent hose ① to the air bleeder
valve and insert the other end of the hose into a
receptacle.
PERIODIC MAINTENANCE 2-18
[ Left side of Front Brake ]
[ Right side of Front Brake ]
[ Rear Brake ]
①