HYOSUNG Aquil GV650 Service Manual page 163

● Remove the handlebar mounting bolts, right and left.
● Remove the handlebar ① .
◉ REMOUNTING
Perform the remounting work in the reverse order of
the r e m o v a l p r o c e d u r e s w h i l e o b s e r v i n g t h e
following instructions.
● Tighten the handlebar mounting bolts to the
specified torque, right and left.
Handlebar mounting bolts
: 40~50 N∙m (4.0~5.0 kg∙m)
● Align the mating face of clutch lever holders with
the respective punch marks and tighten the bolt.
● Install the brake master cylinder.
(Refer to page 7-16).
CHASSIS 7-18
①