HYOSUNG Aquil GV650 Service Manual page 91

◉ MAGNETO ROTOR
● Fit the key into the key slot on the crankshaft.
● With the magneto rotor, install the starter clutch on
the crankshaft.
● Apply a small quantity of THREAD LOCK "1324"to
the threaded parts of crankshaft.
THREAD LOCK "1324"
● Tighten the magneto rotor bolt to the specified
torque.
Conrod holder : 09910-20115
Magneto rotor bolt
: 110~170 N∙m (11.0~17.0 kg∙m)
◉ STARTER IDLE GEAR AND
MOTOR
● Install the starter idle gear, shaft.
● Install the starter motor.
ENGINE 3-48