HYOSUNG Aquil GV650 Service Manual page 51

▣ ENGINE PULLEY
● Loosen the rear axle bolt ① and belt adjusters ②,
left and right.
● Install the engine pulley.
● Tighten the engine pulley nut ③ to the specified
torque.
Engine pulley nut
: 130~160 N∙m (13.0~16.0 kg∙m)
NOTE
When tightening the engine pulley nut,
depress the rear brake pedal.
● Bend the lock washer securely.
● Install the gearshift arm and adjust the gearshift lever
height. (Refer to page 2-10)
● Install the breather hose and engine pulley cover.
● Connect each electric parts and its couplers.
(Refer to page 8-24~30)
● Install the exhaust pipes and mufflers.
● Install the carburetor and air cleaner.
(Refer to page 4-7)
● Install the radiator and radiator cover.
(Refer to page 5-4)
● Af t e r r e m o u n t i n g t h e e n g i n e , t h e f o l l o w i n g
adjustments are necessary.
Engine idling speed
Throttle cable play
Clutch cable play
Drive belt
Gearshift lever height
Engine oil level
Engine coolant
Refer to page 2-9
Refer to page 2-9
Refer to page 2-10
Refer to page 2-15
Refer to page 2-10
Refer to page 2-13
Refer to page 2-23
②
②
ENGINE 3-8
①
③