◉ CAMSHAFT ASSEMBLY
● Distinguish the "EX"mark for the exhaust camshaft,
the "IN"mark for the intake camshaft.
● With pulling up the camshaft drive chain, align the "
F"mark of magneto rotor into the punching mark of
magneto cover to turn the crankshaft.
(Front cylinder)
CAUTION
When adjusting the rear cylinder, align the "
mark of magneto rotor into turn counter-clock-
wise 285�at the position of front cylinder.
CAUTION
If turn the crankshaft without pulling up the camshaft
drive chain, the chain may be fallen off between the
crankcase and cam chain drive sprocket.
● The front cylinder head install first the exhaust
camshaft, following the intake camshaft.
The rear cylinder head install first the intake as the
cam chain tensioner adjuster exist exhaust side.
|
|
R"
EX
EX
ENGINE 3-52
IN
IN