HYOSUNG Aquil GV650 Service Manual page 88

3-45 ENGINE
◉ PRIMARY DRIVEN GEAR
NOTE
Apply the engine oil to the inside face of primary
driven gear bearing.
● Install the primary driven gear assembly.
◉ CLUTCH
● Install the clutch sleeve hub ①, lock washer ②.
● Install the clutch sleeve hub nut, and tighten it to the
specified torque using the special tool.
Clutch sleeve hub holder : 09920-53710
Clutch sleeve hub nut
: 40~60 N∙m (4.0~6.0 kg∙m)
● Bend the lock washer securely.
● Install the clutch drive plate NO. 2 �.
● Install the spring washer seat � and spring washer
� onto the clutch sleeve hub correctly.
● Install the clutch driven plates � and drive plates
NO. 1 � one by one into the clutch sleeve hub in the
prescribed order.
①
�
②
�