Table of Contents
Advertisement
Port
01
02
12
----------------------------------------------------------------------
---------
CAP
I/E
OFF
Port
13
14
24
----------------------------------------------------------------------
---------
OFF
OFF
OFF
Ingress Filter : All frames
MAC : 00-00-00-00-00-00
00-00-00-00-00-00
Divider : 00000
[P]: set Port mirror status, [R]: Reset all mirror Configure
[I]: Ingress rule Configure, [E]: Egress rule Configure
[ ]
6.4.2 R: Reset all mirror Configure
R: Reset all mirror Configure, use this function to disable all mirror
configuration.
6.4.3 I/E: Ingress/Egress rule Configure
I/E: Ingress/Egress mirror rule Configure, use this function to select mirror
rules of all system.
After you press "I" or "E", you have 5 settings to Ingress or Egress.
P: mirror all port's frames
Press 'P' to monitor all frames of all ports that are set as Ingress/Egress
ports.(default will mirror all frames of selected ports)
D: mirror Dest. MAC Address
Select 'D' to mirror all Ingress/Egress frames that has specific Destination
MAC Address(Setup in 'M' enter MAC Address) of all ports that be chosen set
as Ingress/Egress ports.
S: mirror Source MAC Address
Select 'S' to mirror all Ingress/Egress frames that has specific Source MAC
Address(Setup in 'M' enter MAC Address) of all ports that be chosen as
LevelOne FSW-2440TX
24-Port Smart Switch
====================
03
04
05
06
OFF
OFF
OFF
OFF
15
16
17
18
OFF
OFF
OFF
OFF
Egress Filter : All frames
22
07
08
09
10
OFF
OFF
OFF
OFF
19
20
21
22
OFF
OFF
OFF
OFF
MAC :
Divider : 00000
[ESC]:Exit
11
OFF
23
OFF
Advertisement
Table of Contents
