Troubleshooting <Acd - Mitsubishi Lancer Evolution-VII Workshop Manual

MANUAL TRANSMISSION - Troubleshooting <ACD>
TROUBLESHOOTING <ACD>
BASIC TROUBLESHOOTING CONDITIONS
Refer to GROUP 00 - How to Use Troubleshooting/Inspection Service Points.
NOTE
Before starting the troubleshooting procedure, make sure that the following items have been checked
okay.
Is the appropriate steering wheel installed at the center of the steering column shaft correctly?
D
Are the tire, wheel size, specifications, air pressure, balance, and wear state normal?
D
Is the wheel alignment normal?
D
Has the engine, suspension, etc. been remodeled in such a way that it will affect the ACD and AYC
D
systems?
ACD mode indicator lamp
DIAGNOSIS FUNCTION
READING DIAGNOSIS CODE
Read a diagnosis code by the MUT-II or ACD mode indicator
lamp. (Refer to GROUP 00 - How to Use Troubleshooting/
Inspection Service Points.)
NOTE
Connect the MUT-II to the diagnosis connector (16-pin).
ERASING DIAGNOSIS CODES
When using the MUT-II
Connect the MUT-II to the diagnosis connector (16-pin) and
erase the diagnosis code.
Caution
Turn the ignition switch to the "LOCK"(OFF) position
before connecting or disconnecting the MUT-II.
22A-5