Mitsubishi Lancer Evolution-VII Workshop Manual page 613

19 ± 3 N·m
(Engine oil)
12. Crank angle sensor
AB" "CA 13. Crankshaft sprocket
"CA 14. Crankshaft sensing blade
Timing Mark
Crankshaft
sprocket
ENGINE -
Timing Belt and Timing Belt B
16
15
13
162 ± 5 N·m
REMOVAL SERVICE POINTS
AA" TIMING BELT REMOVAL
1. Rotate the crankshaft clockwise and mate timing marks
2. Loosen the mounting bolt of the tensioner pulley and
MB991385
AB" CRANKSHAFT SPROCKET REMOVAL
MB991367
12
14
8.8 ± 1.0 N·m
"BA D Timing belt B tension adjustment
"AA 15. Timing belt B tensioner
AC" "AA 16. Timing belt B
with each other to position No.1 cylinder at compression
TDC.
Caution
Ensure that the crankshaft always rotates clockwise.
remove the timing belt.
Caution
When the timing belt is reused, use a chalk to indicate
an arrow of rotation direction on the back of the belt
so that it can be re-assembled in the same direction
as before.
11A-35