Power Steering Oil Hoses - Mitsubishi Lancer Evolution-VII Workshop Manual

37A-30
STEERING - Power Steering Oil Pump/Power Steering Oil Hoses
Suction hose
Marking
DISASSEMBLY AND REASSEMBLY
NOTE
: Automatic transmission fluid DEXRON II
Disassembly steps
1. Suction connector
2. O-ring

POWER STEERING OIL HOSES

REMOVAL AND INSTALLATION
Caution
1. Before removing the clock spring, always see GROUP 52B - Caution for Service and Air Bag
Module Clock Spring
2. If the vehicle is equipped with the Brembo disc brake, during maintenance, take care not to
contact the parts or tools to the caliper, because the paint of caliper will be scratched.
3. On the tightening section indicated in the mark (*), lightly tighten the nut first, and then finally
tighten it with the engine weight applied on the body.
"BA PRESSURE HOSE ASSEMBLY/SUCTION HOSE
Install the pressure hose assembly and suction hose as
illustrated.
Pressure hose
assembly
Notch
39 ± 5 N·m
3
4
REMOVAL
21 ± 3 N·m
1
2
3. Connector
4. Gasket