Mitsubishi Lancer Evolution-VII Workshop Manual page 819

Terminal No. Inspection item
3 - 12 Fuel pressure control solenoid valve
4 - 12 Stepper motor coil (A1)
17 - 12 Stepper motor coil (A2)
5 - 12 Stepper motor coil (B1)
18 - 12 Stepper motor coil (B2)
6 - 12 EGR control solenoid valve
9 - 12 Purge control solenoid valve
11 - 12 Waste gate solenoid valve
13 - Body earth ENGINE-ECU earth
26 - Body earth ENGINE-ECU earth
53 - 12 Secondary air control solenoid valve
54 - 12 Oxygen sensor heater (Rear)
60 - 12 Oxygen sensor heater (Front)
72 - 92 Intake air temperature sensor
83 - 92 Engine coolant temperature sensor
MPI -
Troubleshooting
Normal condition (Check condition)
28 - 36 Ω (at 20_C)
28 - 33 Ω (at 20_C)
36 - 44 Ω (at 20_C)
22 - 26 Ω (at 20_C)
62 - 74 Ω (at 20_C)
Continuity (0Ω)
28 - 36 Ω (at 20_C)
11 - 18 Ω (at 20_C)
4.5 - 8.0 Ω (at 20_C)
13 - 17 kΩ (When intake air temperature is - 20_C)
5.7 - 6.7 kΩ (When intake air temperature is 0_C)
2.3 - 3.0 kΩ (When intake air temperature is 20_C)
1.0 - 1.5 kΩ (When intake air temperature is 40_C)
0.56 - 0.76 kΩ (When intake air temperature is 60_C)
0.30 - 0.42 kΩ (When intake air temperature is 80_C)
14 - 17 kΩ (When coolant temperature is - 20_C)
5.1 - 6.5 kΩ (When coolant temperature is 0_C)
2.1 - 2.7 kΩ (When coolant temperature is 20_C)
0.9 - 1.3 kΩ (When coolant temperature is 40_C)
0.48 - 0.68 kΩ (When coolant temperature is 60_C)
0.26 - 0.36 kΩ (When coolant temperature is 80_C)
13A-115