Door Inside Handle Looseness Check And Adjustment - Mitsubishi Lancer Evolution-VII Workshop Manual

42-24
Section B - B
B
B
A
BODY -
Doors
DOOR INSIDE HANDLE LOOSENESS CHECK
AND ADJUSTMENT
1. Check that the door inside handle looseness satisfies
the standard value.
Standard value (A):
Front 9.6 ± 9.2 mm
Rear 9.0 ± 9.2 mm
2. If outside the standard value, remove the door trim.(Refer
to P.42-27.)
3. Adjust the looseness of the inside handle using the clip
joining the inside handle and rod.