Configuring The Ck31 For Your Network; Configuring 802.11B/G Radio Communications - Intermec CK31 User Manual

Configuring the CK31 for Your Network

The CK31 is a versatile handheld computer that you can easily
add to your wired or wireless data collection network. You can
connect your CK31 to your network using:
• 802.11b/g radio communications.
• Bluetooth communications
• Serial communications.

Configuring 802.11b/g Radio Communications

Make sure all components with antennas are at least 30 cm
(1 ft) apart when power is applied. Failure to comply could
result in equipment damage.
The wireless CK31 has an internal 802.11b/g radio to transfer
data using wireless communications. This section of the manual
assumes that you have already set up your wireless
communications network including your access points. If you
are using a UDP Plus network, you also need to have your
Intermec Application Server communicating with a host
computer.
Your CK31 supports these network protocols:
• TCP/IP
• UDP Plus
The next sections explain the parameters you need to configure
for the CK31 to work in your wireless network.
CK31 Handheld Computer User's Manual
Chapter 2 — Configuring the CK31
43