Intermec CK31 User Manual page 49

To enable or disable symbologies
1 From the ScanDemo window, tap the Symbologies button
to see the symbologies that are enabled.
2 Select or clear the symbologies you want to use and tap Back.
3 If you want to enable symbologies not shown on the Scanner
Symbologies window, tap Intermec Settings. Intermec
Settings appears on your screen.
4 From the Intermec Settings application, go to Scanners,
Symbologies > Internal Scanner > Symbologies.
5 Enable or disable any of the symbologies you want to use.
6 Save your settings and close Intermec Settings. The Scanner
Symbologies window reappears.
CK31 Handheld Computer User's Manual
Chapter 1 — Using the CK31 Handheld Computer
31