Intermec CK31 User Manual page 83

d Enter a User Name and Password and enable the Save
e (Optional) In the Domain field, enter the Active Directory
f Press Enter.
7 Exit Intermec Settings.
To enable WPA-PSK With Microsoft Security
1 Make sure you have configured the communications and
radio parameters on your CK31.
2 Open Intermec Settings.
3 Choose Communications > 802.11 Radio > Microsoft
Security.
4 For Infrastructure Mode, choose Infrastructure.
5 For Network Authentication, choose WPA-PSK. Data
Encryption automatically defaults to TKIP.
6 For Pre-Shared Key, enter the pre-shared key or the
passphrase.
The pre-shared key must be a value of 32 hex pairs preceded
by 0x for a total of 66 characters. The value must match the
key value on the authenticator. The passphrase must be from
8 to 63 characters. After you enter a passphrase, the CK31
internally converts it to a pre-shared key.
This value must match the passphrase on the authenticator.
7 Exit Intermec Settings.
CK31 Handheld Computer User's Manual
Password check box.
domain associated with the user account.
Chapter 2 — Configuring the CK31
65