Upgrading Your Ck31 Using Smartsystems Console - Intermec CK31 User Manual

2 Double-click the .exe file on your desktop PC. An
InstallShield application starts and walks you through the
process of extracting the upgrade files. You can designate the
folder where you want the files to unzip.
If you do not have SmartSystems Console installed, the
default location that the files are extracted to is:
Program Files\Intermec\CK3x OS vx.xx.xx.xxxx
where:
x.xx.xx.xxxx is the operating system upgrade version.
If you have SmartSystems Console installed, the default
location the files are extracted to is:
Program files\Intermec\SmartSystem\Ss_Lib\Software\ CK3x
OS vx.xx.xx.xxxx
where:
x.xx.xx.xxxx is the operating system upgrade version.
3 If you are using an SD card reader, remove the SD card from
the CK31 and place it in the reader.
4 Copy all of the files in Program Files\Intermec\CK3x OS
vx.xx.xx.xxxx to your SD card.
If you are using ActiveSync or an FTP server to copy the files
to your CK31, place the files in the SDMMC Disk folder.
5 If you are using an SD card reader, insert the SD card into
the CK31.
Note: Make sure the CK31 has completely loaded all of the
upgrade files before you remove the SD card, warm boot, or
cold boot the computer.
6 Perform a cold boot on the CK31. For help, see "Cold
Booting the CK31" on page 115.

Upgrading Your CK31 Using SmartSystems Console

You can use the SmartSystems Console to upgrade the operating
system on your CK31. The console is part of SmartSystems
Foundation, which is available from the Intermec web site.
CK31 Handheld Computer User's Manual
Chapter 3 — Developing and Installing Applications
91