Intermec CK31 User Manual page 110

Chapter 3 — Developing and Installing Applications
Before you can upgrade your computer, you need:
• SmartSystems Foundation. To download SmartSystems
Foundation, go to www.intermec.com/SmartSystems.
• the device upgrade .exe file. This file is available from the
Intermec web site at www.intermec.com. Go to Service &
Support > Downloads. Make sure the file you select is for
your language.
To upgrade a CK31 using SmartSystems Console
1 Install SmartSystems Foundation on your PC and open the
console.
2 Make sure the console and the CK31s are on the same
subnet.
3 Make sure your CK31s are either in a communications dock
or charging dock or that power management is disabled.
4 Download the device upgrade .exe file to your desktop PC.
5 Double-click the .exe file on your desktop PC. An
InstallShield application starts and walks you through the
process of extracting the upgrade files in the default location.
Note: Do not change the default location where InstallShield
extracts the files. SmartSystems Console requires that the files
be located in the default directory.
6 In the software vault, locate the device upgrade you want to
install.
7 Drag-and-drop the device upgrade onto each CK31 you want
to upgrade. SmartSystems Console will tell you that it is
installing the upgrade on your CK31.
Once the upgrade is done downloading to your CK31, your
CK31 replaces the operating system and then automatically cold
boots. Progress messages appear on the CK31 screen.
The SmartSystems Console will show your CK31 as being
offline until the CK31 reboots and reconnects to the system.
92 CK31 Handheld Computer User's Manual