Intermec CK31 User Manual page 80

Chapter 2 — Configuring the CK31
3 Open Intermec Settings.
4 Choose Communications > 802.11 Radio > Funk Security
> Profile.
5 For Association, choose WPA or WPA2 and press Enter.
Encryption automatically defaults to TKIP if you are using
WPA. Encryption automatically defaults to AES if you are
using WPA2.
6 For 8021x, choose TTLS, PEAP, or TLS and press Enter.
If you choose TTLS or PEAP:
a For Prompt for Credentials, choose Enter credentials
b Select User name, type your user name, and then press
c Select User Password, type a user password, and then
d For Validate Server Certificate, choose Yes and press
If you choose TLS:
a Load a user and root certificate on your CK31. For help,
b For Validate Server Certificate, choose Yes and press
c You must enter a User Name and Subject Name. You can
7 Exit Intermec Settings.
62
now.
Note: You can use Prompt for credentials to troubleshoot
your connection to the network if you have problems.
Enter.
press Enter.
Enter.
Note: You must have the date on the CK31 set correctly
when you enable Validate Server Certificate.
see "Loading a Certificate" on page 71.
Enter.
also enter a Server Common Name if you want to increase
your level of security.
CK31 Handheld Computer User's Manual