Valet Mode - Dodge Challenger SRT 392 2015 Operating Information Manual

factory settings, or press the "Shift Light Off"
button on the touchscreen to turn the system off
completely.

Valet Mode

Valet Mode Activation
To enter Valet Mode press the "Valet" button on
the touchscreen and a popup screen will ask
you if you would like to enter Valet Mode, after
selecting "Yes" you will be asked to enter a 4
digit PIN code. The PIN code is not set, so you
are free to select any 4 digit numeric combina-
tion that will be easy to remember.
154
While in Valet Mode the following vehicle con-
figurations are set and locked to prevent unau-
thorized modification:
• Engine limited to the lowest power output
state.
• Transmission locks out access to first gear
and up-shifts earlier than normal.
• Traction, Steering, and Suspension are set to
their STREET settings.
• Steering wheel paddle shifters are disabled.
• The Drive Mode interface is not available.
Pressing the SRT button on the touchscreen
will display the unlock keypad.
• The ESC Off button is disabled.
• The Launch Control button is disabled.
Valet Mode Deactivation
To exit Valet Mode you must enter the same 4
digit PIN that was used to enter the mode. The
unlock keypad can be accessed by either push-
ing the SRT button on the faceplate, or pressing
the "Valet Mode Active – Press Here to Exit"
button on the touchscreen.