Dodge Challenger SRT 392 2015 Operating Information Manual page 164

MAX A/C
MAX A/C sets the control for maximum cooling
performance.
Press and release to toggle between MAX A/C
and the prior settings. The button on the touch-
screen illuminates when MAX A/C is ON.
In MAX A/C, the blower level and mode position
can be adjusted to desired user settings. Press-
ing other settings will cause the MAX A/C
operation to switch to the prior settings and the
MAX A/C indicator will turn off.
Recirculation
When outside air contains smoke,
odors, or high humidity, or if rapid
cooling is desired, you may wish to
recirculate interior air by pressing
the Recirculation control button.
The recirculation indicator will illu-
minate when this button is selected. Press the
button a second time to turn off the Recircula-
tion mode and allow outside air into the vehicle.
NOTE:
In cold weather, use of Recirculation mode
may lead to excessive window fogging. The
recirculation feature may be unavailable
(button on touchscreen greyed out) if con-
ditions exist that could create fogging on the
inside of the windshield. On systems with
Manual Climate Controls, the Recirculation
mode is not allowed in Defrost mode to
improve window clearing operation. Recir-
culation will be disabled automatically if this
mode is selected. Attempting to use Recir-
culation while in this mode will cause the
LED in the control button to blink and then
turn off.
Automatic Temperature Control
(ATC)
Automatic Operation
1. Push the AUTO button on the faceplate or
press the "AUTO" button on the touch-
screen.
2. Next, adjust the temperature you would like
the system to maintain by adjusting the
driver and passenger temperature buttons
on the faceplate or buttons on the touch-
screen. Once the desired temperature is
displayed, the system will achieve and auto-
matically maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the
temperature. You will experience the great-
est efficiency by simply allowing the system
to function automatically.
NOTE:
• It is not necessary to move the tempera-
ture settings. The system automatically
adjusts the temperature, mode, and
blower speed to provide comfort as
quickly as possible.
• The temperature can be displayed in U.S.
or Metric units by
Uconnect® customer-programmable fea-
ture. Refer to the "Uconnect® System
Settings" in this section of the manual.
selecting the
161